Blog Detail

Home / Blog / How to Troubleshoot Common Dryer Problems

How to Troubleshoot Common Dryer Problems image
How to Troubleshoot Common Dryer Problems

Dealing with a malfunctioning dryer can be frustrating, especially when you're in the middle of your laundry routine. Fortunately, many common dryer problems can be diagnosed and resolved at home with a bit of basic knowledge and the right tools. Understanding the root of the issue is the first step to fixing it and in many cases, you can avoid the cost of a professional repair.

In this comprehensive guide, we'll walk you through six of the most common dryer problems, their possible causes, and step-by-step troubleshooting solutions.

1. Dryer Not Heating Up

A dryer that tumbles but doesn’t heat is a common issue. This usually points to a problem with the components responsible for generating or regulating heat.

Possible Causes:

  • Faulty Heating Element: The heating element is what warms the air inside the dryer. If it's burned out or broken, the dryer will run without producing heat.
  • Blown Thermal Fuse: A thermal fuse protects the dryer from overheating. If the dryer overheats, the fuse will blow and prevent the heating mechanism from turning on.
  • Igniter or Gas Valve Solenoid Failure (Gas Dryers): For gas dryers, the igniter lights the gas to create heat. If it or the solenoid fails, the dryer won’t heat.

Troubleshooting Steps:

  • Check Power Supply: Make sure the dryer is plugged in properly and the circuit breaker hasn’t tripped.
  • Inspect the Heating Element: Unplug the dryer and visually inspect the heating element. Use a multimeter to test for continuity. No continuity means it needs replacement.
  • Test the Thermal Fuse: Use a multimeter to check if the fuse has continuity. If not, replace it.
  • For Gas Dryers: Ensure that the gas valve is open and that the igniter is glowing. If the igniter doesn't light or you smell gas, the solenoid may need replacing.

2. Dryer Not Tumbling

When your dryer turns on but the drum doesn’t spin, it usually indicates a mechanical issue.

Possible Causes:

  • Broken Drive Belt: The drum is rotated by a drive belt. If this belt breaks, the drum won’t spin.
  • Faulty Motor: If the motor has failed, the dryer will not turn the drum.
  • Worn Drum Rollers or Axles: These parts help the drum spin smoothly. Damage or wear can stop the drum from turning.

Troubleshooting Steps:

  • Inspect the Drive Belt: Unplug the dryer, remove the back or front panel, and look for a broken belt. Replace if necessary.
  • Test the Motor: If the belt is intact but the drum still won’t turn, test the motor using a multimeter. If there’s no continuity, you’ll need to replace it.
  • Check the Drum Rollers and Axles: Spin the drum by hand. If it’s difficult to turn or makes grinding noises, check the rollers and axles for wear.

3. Excessive Noise or Vibrations

Dryers should run quietly. If yours is making loud or unusual noises, it could indicate internal wear or foreign objects stuck inside.

Possible Causes:

  • Worn Drum Support Rollers: These can cause squealing or thumping sounds.
  • Worn Drum Bearing: This part supports the drum’s rotation. When damaged, it can cause grinding sounds.
  • Foreign Objects: Coins, zippers, or buttons may be caught in the drum or blower wheel.

Troubleshooting Steps:

  • Inspect Drum Rollers: Look for flat spots or loose rollers. Replace if they show signs of wear.
  • Check the Drum Bearing: Remove the drum to inspect the rear bearing. Replace it if it’s worn or making grinding noises.
  • Look for Foreign Objects: Shine a flashlight inside the drum and lint trap area. Remove any visible debris or objects.

4. Dryer Overheating

If your dryer is becoming too hot to touch or shuts off during a cycle, it may be overheating—a potentially hazardous issue.

Possible Causes:

  • Clogged Ventilation: Lint buildup in the duct or lint filter reduces airflow and causes overheating.
  • Malfunctioning Thermostat: The thermostat controls the temperature. A broken one may allow the dryer to overheat.
  • Blocked Lint Filter: A full or dirty filter reduces airflow.

Troubleshooting Steps:

  • Clean the Vent Hose and Duct: Disconnect and clean out all lint buildup using a vacuum or vent cleaning brush.
  • Test the Thermostat: Use a multimeter to test for continuity. Replace it if it’s faulty.
  • Clean or Replace the Lint Filter: Remove lint after every cycle. If the mesh is clogged or damaged, install a new filter.

5. Dryer Won’t Start

If your dryer won’t turn on at all, don’t panic. This issue often has a simple solution.

Possible Causes:

  • Defective Door Switch: Dryers won’t start if the door isn’t fully closed or the switch is faulty.
  • Faulty Start Switch: The dryer won’t respond if the start button isn’t working.
  • Power Supply Problem: A tripped breaker or blown fuse may be cutting off power.

Troubleshooting Steps:

  • Check the Door Switch: Press the door switch manually. If you don’t hear a click, test it with a multimeter and replace it if necessary.
  • Test the Start Switch: Remove the control panel cover and use a multimeter to check for continuity.
  • Inspect Power Source: Make sure the dryer is properly plugged in. Check the circuit breaker and reset it if tripped.

6. Clothes Taking Too Long to Dry

If your dryer is running for a full cycle but clothes are still damp, it's often a sign of restricted airflow or user error.

Possible Causes:

  • Clogged Vent System: Lint buildup restricts airflow, preventing the dryer from drying clothes efficiently.
  • Wrong Settings: Using low heat or a short cycle for thick or large loads may not be enough.
  • Overloading: Too many clothes can block airflow inside the drum.

Troubleshooting Steps:

  • Clean the Vent and Filter: Check the lint filter, exhaust duct, and vent hose. Clean them thoroughly to improve airflow.
  • Adjust Dryer Settings: Use appropriate cycles for the load size and fabric type. Heavy loads may require high heat and extended time.
  • Reduce Load Size: Dry fewer clothes at a time for better airflow and quicker drying.

Final Tips to Solve Common Dryer Issues

  • Routine Maintenance: Clean the lint filter after every cycle. Inspect and clean the vent hose every few months.
  • Use a Multimeter: This inexpensive tool is essential for testing electrical components like fuses, thermostats, and motors.
  • Consult the Manual: Your dryer’s manual can provide model-specific advice and troubleshooting steps.
  • Safety First: Always unplug your dryer before inspecting or repairing internal parts. For gas dryers, turn off the gas supply too.

When to Call a Professional

While many dryer issues can be fixed at home, some problems require professional help especially those involving gas lines, electrical wiring, or complex motor repairs. If you’re not comfortable performing a repair, or if the same issue recurs frequently, it’s best to contact a certified technician.

Troubleshooting your dryer doesn’t have to be intimidating. With a little patience and some basic tools, you can resolve most dryer problems yourself. Whether your dryer isn’t heating, won’t start, or is making strange noises, this guide offers practical, step-by-step solutions to get your laundry routine back on track.

Taking the time to diagnose the issue carefully not only saves money but can extend the life of your appliance.